# Switching

**URL:** https://forum.networklessons.com/c/routing-switching/switching/20.md

[Latest](https://forum.networklessons.com/latest.md) · [Categories](https://forum.networklessons.com/categories.md)

---

## [About the Switching category](https://forum.networklessons.com/t/about-the-switching-category/26)

<div class="topic-metadata">

**Author:** [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Replies:** 0\
**Last updated:** [December 13, 2016, 12:33pm UTC](https://forum.networklessons.com/t/about-the-switching-category/26 "2016-12-13T12:33:23Z")

</div>

Any general switching topics/protocols can be discussed here.

---

## [Cisco Catalyst 9400 Series Switches](https://forum.networklessons.com/t/cisco-catalyst-9400-series-switches/58827)

<div class="topic-metadata">

**Author:** [@vishal\_entc](https://forum.networklessons.com/u/vishal_entc)\
**Replies:** 1\
**Last updated:** [July 27, 2026, 4:53am UTC](https://forum.networklessons.com/t/cisco-catalyst-9400-series-switches/58827 "2026-07-27T04:53:35Z")

</div>

I am looking for Cisco Catalyst 9400 Series Switches stack troubleshooting and replacing of faulty switch in stack with new one. thanks

---

## [Ip route profile command](https://forum.networklessons.com/t/ip-route-profile-command/54140)

<div class="topic-metadata">

**Author:** [@temitope.ogunwola](https://forum.networklessons.com/u/temitope.ogunwola)\
**Replies:** 1\
**Last updated:** [December 13, 2024, 7:40am UTC](https://forum.networklessons.com/t/ip-route-profile-command/54140 "2024-12-13T07:40:38Z")

</div>

Can someone explain how to read the output of show ip route profile . I got a report of routes flapping..

---

## [Internal Vlans](https://forum.networklessons.com/t/internal-vlans/51561)

<div class="topic-metadata">

**Author:** [@pmi75000](https://forum.networklessons.com/u/pmi75000)\
**Replies:** 2\
**Last updated:** [August 27, 2024, 12:52pm UTC](https://forum.networklessons.com/t/internal-vlans/51561 "2024-08-27T12:52:52Z")

</div>

Hi Community, I’ve got please a question about internal Vlans : I learned that on Multilayer switches, I mean that run legacy IOS, when you configure an interface as “no switchport” and then assign it an IP address, th…

---

## [Viptela SDWAN templates](https://forum.networklessons.com/t/viptela-sdwan-templates/49882)

<div class="topic-metadata">

**Author:** [@stephenstown20](https://forum.networklessons.com/u/stephenstown20)\
**Replies:** 1\
**Last updated:** [July 8, 2024, 5:39am UTC](https://forum.networklessons.com/t/viptela-sdwan-templates/49882 "2024-07-08T05:39:04Z")

</div>

hello I am trying to convert a legacy IOS-XE configuration to SDWAN templates has anyone used a template for 802.1q trunking ?

---

## [Daily switching problem at work](https://forum.networklessons.com/t/daily-switching-problem-at-work/47540)

<div class="topic-metadata">

**Author:** [@Andy2](https://forum.networklessons.com/u/Andy2)\
**Replies:** 1\
**Last updated:** [May 7, 2024, 5:57am UTC](https://forum.networklessons.com/t/daily-switching-problem-at-work/47540 "2024-05-07T05:57:33Z")

</div>

I come across a problem at work occasionally. Let say PC1 lose network connection on Lan port 1, But PC1 connect to other Lan ports no problem. Other PCs connect to Lan port 1 no problem too. Only that particular PC co…

---

## [Root Guard & BPDU Guard](https://forum.networklessons.com/t/root-guard-bpdu-guard/37799)

<div class="topic-metadata">

**Author:** [@hemanttolwani1989](https://forum.networklessons.com/u/hemanttolwani1989)\
**Replies:** 1\
**Last updated:** [July 3, 2023, 2:59pm UTC](https://forum.networklessons.com/t/root-guard-bpdu-guard/37799 "2023-07-03T14:59:15Z")

</div>

What’s the difference between Root guard and BPDU guard? Can we say Root guard blocks only superior BPDU and allow Inferior BPDU and Interface enter into Root Inconsistent state while the BPDU guard blocks superior and I…

---

## [Same MAC address in multiple VLANs](https://forum.networklessons.com/t/same-mac-address-in-multiple-vlans/1595)

<div class="topic-metadata">

**Author:** [@rushabhajaydoshi](https://forum.networklessons.com/u/rushabhajaydoshi)\
**Replies:** 4\
**Last updated:** [March 13, 2023, 6:22am UTC](https://forum.networklessons.com/t/same-mac-address-in-multiple-vlans/1595 "2023-03-13T06:22:10Z")

</div>

Hello Team, Can you please help me out with this: interface Ethernet46 description CUST-COPROSYS-DIRECT load-interval 5 switchport trunk native vlan 50 switchport trunk allowed vlan 50,705,1373 switchpor…

---

## [Vlans, Intervlan and Standby](https://forum.networklessons.com/t/vlans-intervlan-and-standby/13424)

<div class="topic-metadata">

**Author:** [@dlais1987](https://forum.networklessons.com/u/dlais1987)\
**Replies:** 5\
**Last updated:** [January 19, 2023, 5:52am UTC](https://forum.networklessons.com/t/vlans-intervlan-and-standby/13424 "2023-01-19T05:52:39Z")

</div>

Hi Lazaros, I have attached a network that I recently created and in making the network i decided not to use vtp this time and on sw3 if I had a vlan only on that switch would I still have to add it to the other switche…

---

## [Spanning-tree portfast edge & network](https://forum.networklessons.com/t/spanning-tree-portfast-edge-network/4311)

<div class="topic-metadata">

**Author:** [@doogle1b1](https://forum.networklessons.com/u/doogle1b1)\
**Replies:** 5\
**Last updated:** [September 26, 2022, 9:16am UTC](https://forum.networklessons.com/t/spanning-tree-portfast-edge-network/4311 "2022-09-26T09:16:07Z")

</div>

Hello Rene, I received one of the virl switch images and was building a lab testing spanning tree. Can you tell me what is the difference between the commands listed below: #spanning-tree portfast edge #spanning-tree…

---

## [Input error](https://forum.networklessons.com/t/input-error/28853)

<div class="topic-metadata">

**Author:** [@prashantchauhan.net](https://forum.networklessons.com/u/prashantchauhan.net)\
**Replies:** 3\
**Last updated:** [August 5, 2022, 4:55am UTC](https://forum.networklessons.com/t/input-error/28853 "2022-08-05T04:55:53Z")

</div>

there or some input vlan error . could someone explain what could be impact this is our WAN interface . WNRT01#sh int Gi0/0/2.4000 controller | i error 1983761 input vlan errors WNRT01#sh int Gi0/0/2.4000 control…

---

## [Catalyst 9300 - fed switch active fwd-asic drops exceptions](https://forum.networklessons.com/t/catalyst-9300-fed-switch-active-fwd-asic-drops-exceptions/26788)

<div class="topic-metadata">

**Author:** [@morgb74](https://forum.networklessons.com/u/morgb74)\
**Replies:** 3\
**Last updated:** [May 21, 2022, 2:45pm UTC](https://forum.networklessons.com/t/catalyst-9300-fed-switch-active-fwd-asic-drops-exceptions/26788 "2022-05-21T14:45:05Z")

</div>

Hi, I’m looking for an explanation for the following command + part of the output :- show platform hardware fed switch active fwd-asic drops exceptions Specifically around the PKT\_DROP\_COUNT - this is incrementing …

---

## [Ethernet Transparency From Port to Port](https://forum.networklessons.com/t/ethernet-transparency-from-port-to-port/24391)

<div class="topic-metadata">

**Author:** [@james.pearce](https://forum.networklessons.com/u/james.pearce)\
**Replies:** 5\
**Last updated:** [March 5, 2022, 6:05am UTC](https://forum.networklessons.com/t/ethernet-transparency-from-port-to-port/24391 "2022-03-05T06:05:04Z")

</div>

Hi Guys, I have a couple of nexus 5600 switches connected via a physical dark fibre line. We carry our own VLAN tags over the link. But I would now like to make a port connected at one location be able to transparen…

---

## [Please Explain about Snake test for Layer-2 switching test](https://forum.networklessons.com/t/please-explain-about-snake-test-for-layer-2-switching-test/1902)

<div class="topic-metadata">

**Author:** [@whijoon](https://forum.networklessons.com/u/whijoon)\
**Replies:** 3\
**Last updated:** [October 22, 2021, 4:49am UTC](https://forum.networklessons.com/t/please-explain-about-snake-test-for-layer-2-switching-test/1902 "2021-10-22T04:49:36Z")

</div>

Could you explain how the switch handles L2 traffics by using all ports internally and externally? Please refer the above the url for the topology setup. I assume that the switch kn…

---

## [Distributed switch - vmware & Linux](https://forum.networklessons.com/t/distributed-switch-vmware-linux/15316)

<div class="topic-metadata">

**Author:** [@Giovanni](https://forum.networklessons.com/u/Giovanni)\
**Replies:** 1\
**Last updated:** [September 10, 2021, 10:08am UTC](https://forum.networklessons.com/t/distributed-switch-vmware-linux/15316 "2021-09-10T10:08:25Z")

</div>

HI Can you give me a definition of distributed switch (on wmware and linux )? I saw that in openWRT exist packages called “distributed switch” available to install, but I am not sure to understand how it works.

---

## [Packet loss](https://forum.networklessons.com/t/packet-loss/15186)

<div class="topic-metadata">

**Author:** [@Pavanrsingh007](https://forum.networklessons.com/u/Pavanrsingh007)\
**Replies:** 1\
**Last updated:** [August 23, 2021, 4:58am UTC](https://forum.networklessons.com/t/packet-loss/15186 "2021-08-23T04:58:11Z")

</div>

Hi- We are facing packet loss through the red line direction and not through the green line. Any basic troubleshooting steps for the packet loss issues.

---

## [Nexus VPC connected to Cisco Stack](https://forum.networklessons.com/t/nexus-vpc-connected-to-cisco-stack/15054)

<div class="topic-metadata">

**Author:** [@Support1](https://forum.networklessons.com/u/Support1)\
**Replies:** 9\
**Last updated:** [August 14, 2021, 6:37am UTC](https://forum.networklessons.com/t/nexus-vpc-connected-to-cisco-stack/15054 "2021-08-14T06:37:51Z")

</div>

Dear all, I have a Nexus 9K VPC construction that I want to connect to a Cisco Meraki stack. I need the stack for redundancy purposes, plus the Meraki side is doing some L3 routing as one unit. What would be the best w…

---

## [Configuration multi-auth](https://forum.networklessons.com/t/configuration-multi-auth/14823)

<div class="topic-metadata">

**Author:** [@btmikigigs](https://forum.networklessons.com/u/btmikigigs)\
**Replies:** 0\
**Last updated:** [July 6, 2021, 11:47am UTC](https://forum.networklessons.com/t/configuration-multi-auth/14823 "2021-07-06T11:47:28Z")

</div>

Hi, I configured freeradius and switch with this instruction and I have a problem with enabling multi-auth authorization. When i configure interface i have only 2 mode multi: s1(config)#interface fastEthernet0/24 s1(…

---

## [Question TRUNK Q-in Q AND TAG NATIVE VAN](https://forum.networklessons.com/t/question-trunk-q-in-q-and-tag-native-van/14661)

<div class="topic-metadata">

**Author:** [@ahmed.mohamed149](https://forum.networklessons.com/u/ahmed.mohamed149)\
**Replies:** 0\
**Last updated:** [June 14, 2021, 6:18am UTC](https://forum.networklessons.com/t/question-trunk-q-in-q-and-tag-native-van/14661 "2021-06-14T06:18:11Z")

</div>

Hello, TRUNK Q-in-Q is only between isp and customer ? for example can I double tag only my LAN side for more safety ? It is good to tag VLAN NATIVE yes or no , why ? If iI don’t allow vlan native between to two devic…

---

## [Spanning-tree Question](https://forum.networklessons.com/t/spanning-tree-question/14532)

<div class="topic-metadata">

**Author:** [@weipngl](https://forum.networklessons.com/u/weipngl)\
**Replies:** 4\
**Last updated:** [June 2, 2021, 12:09pm UTC](https://forum.networklessons.com/t/spanning-tree-question/14532 "2021-06-02T12:09:21Z")

</div>

Hey need advise. I tried to simulate this in CML, but I couldn’t get what I wanted. I need to replace the two Old-Switch 1 and Old Switch 2 in attached file with new Cisco model. Just trying to understand how many time…

---

## [Cisco Nexus switch command for multicast](https://forum.networklessons.com/t/cisco-nexus-switch-command-for-multicast/14100)

<div class="topic-metadata">

**Author:** [@ncc99999](https://forum.networklessons.com/u/ncc99999)\
**Replies:** 2\
**Last updated:** [April 14, 2021, 1:49pm UTC](https://forum.networklessons.com/t/cisco-nexus-switch-command-for-multicast/14100 "2021-04-14T13:49:04Z")

</div>

Hi guys, What is Cisco Nexus command to see the multicast UDP port assignment? I normally use ‘sh ip mroute det’ to see the multicast ip mapping but this command doesn’t show multicast port assiged for the specific add…

---

## [SVI secondary ip add](https://forum.networklessons.com/t/svi-secondary-ip-add/13605)

<div class="topic-metadata">

**Author:** [@maher.mina](https://forum.networklessons.com/u/maher.mina)\
**Replies:** 1\
**Last updated:** [February 15, 2021, 2:41pm UTC](https://forum.networklessons.com/t/svi-secondary-ip-add/13605 "2021-02-15T14:41:40Z")

</div>

Hello, i have a switch L3 who has an SVI with 2 ip add on the same subnet, an example interface vlan 10 ip add 192.168.1.2 255.255.255.0 ip add 192.168.1.3 255.255.255.0 secondary Why the use of 2 ip add on the inter…

---

## [ARP question on Cisco switches](https://forum.networklessons.com/t/arp-question-on-cisco-switches/13428)

<div class="topic-metadata">

**Author:** [@bj\_shirley](https://forum.networklessons.com/u/bj_shirley)\
**Replies:** 1\
**Last updated:** [January 28, 2021, 7:37am UTC](https://forum.networklessons.com/t/arp-question-on-cisco-switches/13428 "2021-01-28T07:37:32Z")

</div>

I have an ARP question. I have a Cisco C9200 that doesn’t seem to accept multiple IP Addresses for a given hardware address. The host that it is ARP’ing is an openBSD gateway appliance (Citrix netscaler) that has a pri…

---

## [WLC connection lost when switches trunk](https://forum.networklessons.com/t/wlc-connection-lost-when-switches-trunk/13335)

<div class="topic-metadata">

**Author:** [@mpsuliga](https://forum.networklessons.com/u/mpsuliga)\
**Replies:** 4\
**Last updated:** [January 21, 2021, 12:04pm UTC](https://forum.networklessons.com/t/wlc-connection-lost-when-switches-trunk/13335 "2021-01-21T12:04:26Z")

</div>

Hi, I think this is a related question. I have this set up that stops working at some point and I can’t figure out why. Sw1 connects to the DHCP server, to the WLC and to Sw2 and Sw3. WLC has management IP address of …

---

## [Stack Switch question](https://forum.networklessons.com/t/stack-switch-question/4095)

<div class="topic-metadata">

**Author:** [@JCaines325](https://forum.networklessons.com/u/JCaines325)\
**Replies:** 5\
**Last updated:** [October 15, 2020, 1:25pm UTC](https://forum.networklessons.com/t/stack-switch-question/4095 "2020-10-15T13:25:47Z")

</div>

I was having an issue with two switches in a stack. I did a show version and I see both are using the same img but one is in “Bundle” mode and the other is “Install” Mode. Any help would be appreciated.

---

## [Q-in-Q lab, using IOU GNS3 L2-L3 Images, Unable to ping the R1 or R2](https://forum.networklessons.com/t/q-in-q-lab-using-iou-gns3-l2-l3-images-unable-to-ping-the-r1-or-r2/51)

<div class="topic-metadata">

**Author:** [@ali\_862001](https://forum.networklessons.com/u/ali_862001)\
**Replies:** 7\
**Last updated:** [September 28, 2020, 8:43am UTC](https://forum.networklessons.com/t/q-in-q-lab-using-iou-gns3-l2-l3-images-unable-to-ping-the-r1-or-r2/51 "2020-09-28T08:43:10Z")

</div>

Dear Rene, I believe you are doing great as always. Rene, Followings your CCIE R&S labs and visited many other online sources claiming that GNS3’s IOU feature does support 95% of the switching incl L2 - L3. And I have…

---

## [SPB concept](https://forum.networklessons.com/t/spb-concept/11822)

<div class="topic-metadata">

**Author:** [@saikiran3452](https://forum.networklessons.com/u/saikiran3452)\
**Replies:** 6\
**Last updated:** [July 30, 2020, 7:00am UTC](https://forum.networklessons.com/t/spb-concept/11822 "2020-07-30T07:00:57Z")

</div>

Hi All, This is sai. I’ m looking for SPB( shortest path bridging) concepts like how it works, used, benefits and troubleshooting. Hopefully, I’ll get positive news. Thank you!

---

## [How to Set IP address on any interface of a multi-layer switch!](https://forum.networklessons.com/t/how-to-set-ip-address-on-any-interface-of-a-multi-layer-switch/11599)

<div class="topic-metadata">

**Author:** [@Ajmal.ahmadiine](https://forum.networklessons.com/u/Ajmal.ahmadiine)\
**Replies:** 2\
**Last updated:** [June 23, 2020, 2:28am UTC](https://forum.networklessons.com/t/how-to-set-ip-address-on-any-interface-of-a-multi-layer-switch/11599 "2020-06-23T02:28:22Z")

</div>

Hello Liz sir! I have a router 2900 series and a multi-layer switch 3850. I wanted to connect my router (2900) with multi-layer switch in order to use my multi-layer switch as router for LAB The question is here that …

---

## [Configuring double NAT to prevent asymmetric routing](https://forum.networklessons.com/t/configuring-double-nat-to-prevent-asymmetric-routing/11526)

<div class="topic-metadata">

**Author:** [@balchana](https://forum.networklessons.com/u/balchana)\
**Replies:** 1\
**Last updated:** [June 15, 2020, 7:59am UTC](https://forum.networklessons.com/t/configuring-double-nat-to-prevent-asymmetric-routing/11526 "2020-06-15T07:59:25Z")

</div>

Hi guys I hope someone can offer me some assistance with this. Here’s the basic summary: There are 4 datacentres, TN2 - LD3 - DCR - DCS I have an IPSec tunnel between TN2 \> DCR and LD3 \> DCS Diagram below: …

---

## [Same vlan between different locations](https://forum.networklessons.com/t/same-vlan-between-different-locations/10943)

<div class="topic-metadata">

**Author:** [@Giovanni](https://forum.networklessons.com/u/Giovanni)\
**Replies:** 0\
**Last updated:** [April 27, 2020, 10:12am UTC](https://forum.networklessons.com/t/same-vlan-between-different-locations/10943 "2020-04-27T10:12:39Z")

</div>

Hi, I have a question about this topology: Company with office on different sites. Each site have his ebgp peering with different ISPs \*Exist an iBGP between each office. \*On each site exist a webfarm with server wi…

[Next page](https://forum.networklessons.com/c/routing-switching/switching/20.md?page=1)
