# 802.1Q Native VLAN on Cisco IOS Switch

**URL:** <https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082>\
**Category:** Lessons Discussion\
**Created:** [December 26, 2016, 10:29pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082 "2016-12-26T22:29:29Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [December 26, 2016, 10:29pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/1 "2016-12-26T22:29:29Z")

</div>

This topic is to discuss the following lesson:

> **[802.1Q Native VLAN on Cisco IOS Switch](https://networklessons.com/switching/802-1q-native-vlan-cisco-ios-switch)**
>
> This tutorial explains how the native VLAN works and how to change it on Cisco Catalyst Switches.

---

<div class="post-metadata">

**Author:** ![danobustos1](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/d/e99b99/32.png) [@danobustos1](https://forum.networklessons.com/u/danobustos1)\
**Post date:** [March 16, 2015, 12:43am UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/2 "2015-03-16T00:43:06Z")

</div>

Is there any specific reason to tag the native vlan?

---

<div class="post-metadata">

**Author:** ![danobustos1](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/d/e99b99/32.png) [@danobustos1](https://forum.networklessons.com/u/danobustos1)\
**Post date:** [March 16, 2015, 12:43am UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/3 "2015-03-16T00:43:06Z")

</div>

Is there any specific reason to tag the native vlan?

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [March 16, 2015, 10:21am UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/4 "2015-03-16T10:21:35Z")

</div>

Hi Dan,

There is a security vulnerability (VLAN Hopping) when you don’t tag the native VLAN, that’s the only reason I can think of.

If you are interested, I can do a write up for VLAN hopping…might be interesting 🙂

Rene

---

<div class="post-metadata">

**Author:** ![danobustos1](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/d/e99b99/32.png) [@danobustos1](https://forum.networklessons.com/u/danobustos1)\
**Post date:** [May 17, 2015, 11:38pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/5 "2015-05-17T23:38:43Z")

</div>

Thanks for your answer Rene, of course it would be interesting to have the write up for VLAN hopping

Regards

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [May 18, 2015, 11:43am UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/6 "2015-05-18T11:43:12Z")

</div>

Hi Dan,

I put it on my list, when it’s done I’ll let you know.

Rene

---

<div class="post-metadata">

**Author:** ![aelwahid](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/a/977dab/32.png) [@aelwahid](https://forum.networklessons.com/u/aelwahid)\
**Post date:** [June 4, 2015, 9:05am UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/7 "2015-06-04T09:05:16Z")

</div>

Hi René,

What is the difference between a native vlan and the default vlan ?  
Are they the same ?

Thks,

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [June 4, 2015, 10:49am UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/8 "2015-06-04T10:49:43Z")

</div>

Hi Prince,

On Cisco IOS, they are the same thing. VLAN 1 is the default VLAN and it’s also the native VLAN.

Rene

---

<div class="post-metadata">

**Author:** ![hussien.samer](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/hussien.samer/32/2096_2.png) [@hussien.samer](https://forum.networklessons.com/u/hussien.samer)\
**Post date:** [July 27, 2015, 1:00pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/9 "2015-07-27T13:00:04Z")

</div>

Hi Rene,

What is the benefit of changing native VLAN ? I mean what are the security reasons in detail ?  
And what are the possible issues that occur because of NATIVE\_VLAN\_MISMATCH ?

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [July 27, 2015, 1:49pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/10 "2015-07-27T13:49:42Z")

</div>

Hi Hussein,

An attacker would probably start looking for VLAN 1 since it’s the default native VLAN. It’s used for management traffic so that makes it an interesting target. It’s best to use another VLAN number and to tag it for that reason.

Rene

---

<div class="post-metadata">

**Author:** ![hussien.samer](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/hussien.samer/32/2096_2.png) [@hussien.samer](https://forum.networklessons.com/u/hussien.samer)\
**Post date:** [July 27, 2015, 7:00pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/11 "2015-07-27T19:00:39Z")

</div>

Thanks Rene, I got the idea

What about second question ??

cheers.

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [July 27, 2015, 7:47pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/12 "2015-07-27T19:47:47Z")

</div>

Ah sorry forgot about that one. A VLAN mismatch is a bad thing…

For example, if VLAN 10 is native on SW1 and VLAN 1 is native on SW2 then traffic from VLAN 10 will “leak” into VLAN 1 (or vice versa). Make sure you always use the same native VLAN on both sides of the trunk.

---

<div class="post-metadata">

**Author:** ![hussien.samer](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/hussien.samer/32/2096_2.png) [@hussien.samer](https://forum.networklessons.com/u/hussien.samer)\
**Post date:** [July 27, 2015, 8:13pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/13 "2015-07-27T20:13:53Z")

</div>

Thanks Rene, No problem.

Is there an impact on the work of STP when the NATIVE\_VLAN\_MISMATCH ??

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [July 27, 2015, 9:16pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/14 "2015-07-27T21:16:05Z")

</div>

I haven’t tested it but probably the switch will report an error. PVST+ uses a bridge ID that includes the priority and vlan ID. I think STP will notice the mismatch of the VLAN ID.

---

<div class="post-metadata">

**Author:** ![aelwahid](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/a/977dab/32.png) [@aelwahid](https://forum.networklessons.com/u/aelwahid)\
**Post date:** [October 6, 2015, 6:18pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/15 "2015-10-06T18:18:53Z")

</div>

Dear René,

&nbsp;

Couldyou please share the link about " vlan hopping " if it is alreday done

Thks a lot,

Prince

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [October 6, 2015, 7:58pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/16 "2015-10-06T19:58:12Z")

</div>

Hi Prince,

I’ll add it tomorrow, when it’s done I’ll post the link here.

Rene

---

<div class="post-metadata">

**Author:** ![aelwahid](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/a/977dab/32.png) [@aelwahid](https://forum.networklessons.com/u/aelwahid)\
**Post date:** [October 7, 2015, 1:31pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/17 "2015-10-07T13:31:21Z")

</div>

Ok merci René

Prince

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [October 8, 2015, 12:44pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/18 "2015-10-08T12:44:06Z")

</div>

I just finished the VLAN hopping post:

> **[VLAN Hopping](https://networklessons.com/switching/vlan-hopping)**
>
> This lesson explains what a VLAN Hopping attack is and demonstrates that it's impossible on to execute on modern Cisco Catalyst Switches.

The result is interesting, this doesn’t seem to work on modern IOS images anymore 🙂

---

<div class="post-metadata">

**Author:** ![abdohammar](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/a/7ea924/32.png) [@abdohammar](https://forum.networklessons.com/u/abdohammar)\
**Post date:** [November 22, 2015, 10:16pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/19 "2015-11-22T22:16:31Z")

</div>

Hi Rene,

I have to thank you for the clear and simple way of explaining.

about the security behind changing the native vlan and tagging it, what is the point of this? because the attacker while having access to the native vlan (change it and tagging it or not) will be able to sniff the traffic with all the management protocols information.

&nbsp;

&nbsp;

---

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [November 23, 2015, 12:02pm UTC](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082/20 "2015-11-23T12:02:20Z")

</div>

Hi Abdalrahman,

If an attacker had access to one of your switches then they probably would try to get access to the native vlan first. Since everyone knows that VLAN 1 is the default, that’s where they will probably start looking. Using another vlan number makes this a bit harder.

Still, once someone has physical access there’s a lot of bad stuff they can do…best to prevent this from happening in the first place 🙂

Rene

[Next page](https://forum.networklessons.com/t/802-1q-native-vlan-on-cisco-ios-switch/1082.md?page=2)
