Hello,
I’m having problems with my outgoing settings.
Here are my settings of a Cisco 2811 router:
voice-port 0/1/0
trunk-group 1 1
supervisory disconnect dualtone pre-connect
supervisory answer dualtone
input gain 10
output attenuation -1
no vad
no comfort-noise
cptone AR
connection plar 400
description (54) 11-4922-5216
caller-id enable
!
dial-peer voice 1 pots
description Linea 541149225216
preference 1
destination-pattern 9T
port 0/1/0
forward-digits 8
!
dial-peer voice 400 voip
numbering-type unknown
destination-pattern .T
session protocol sipv2
session target ipv4:192.168.0.101:5060
session transport udp
dtmf-relay rtp-nte
codec g711ulaw
clid strip
no vad
Here’s the configuration of freepbx:
type=friend
qualify=yes
nat=no
insecure=very
host=192.168.0.2
dtmfmode=rfc2833
disallow=all
context=from-internal
allow=ulaw
when I want to make a call, it does not work.