# BGP Multipath load sharing iBGP and eBGP

**URL:** <https://forum.networklessons.com/t/bgp-multipath-load-sharing-ibgp-and-ebgp/3275>\
**Category:** Lessons Discussion\
**Created:** [March 22, 2018, 11:40am UTC](https://forum.networklessons.com/t/bgp-multipath-load-sharing-ibgp-and-ebgp/3275 "2018-03-22T11:40:21Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![pavanc.08](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/p/977dab/32.png) [@pavanc.08](https://forum.networklessons.com/u/pavanc.08)\
**Post date:** [March 29, 2018, 10:04am UTC](https://forum.networklessons.com/t/bgp-multipath-load-sharing-ibgp-and-ebgp/3275/2 "2018-03-29T10:04:52Z")

</div>

still multipath is not enabling. below is the config.

```
R1#show run | section bgp
router bgp 1
 neighbor 192.168.12.2 remote-as 23
 neighbor 192.168.13.3 remote-as 23
 maximum-paths 2
 no auto-summary

```

BGP Table:

```
R1#show ip bgp
    BGP table version is 2, local router ID is 192.168.13.1
    Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
                  r RIB-failure, S Stale
    Origin codes: i - IGP, e - EGP, ? - incomplete

       Network Next Hop Metric LocPrf Weight Path
    * 192.168.23.0 192.168.13.3 0 23 i
    *> 192.168.12.2 0 0 23 i

```

Does BGP version 2 support multipath?

---

_[View the full topic](https://forum.networklessons.com/t/bgp-multipath-load-sharing-ibgp-and-ebgp/3275)._