# Cisco ASA Clock Configuration
**URL:** https://forum.networklessons.com/t/cisco-asa-clock-configuration/836
**Category:** Lessons Discussion
**Created:** [December 19, 2016, 4:42pm UTC](https://forum.networklessons.com/t/cisco-asa-clock-configuration/836 "2016-12-19T16:42:10Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)
#### Post date: [December 19, 2016, 4:42pm UTC](https://forum.networklessons.com/t/cisco-asa-clock-configuration/836/1 "2016-12-19T16:42:10Z")
This topic is to discuss the following lesson:
> **[Cisco ASA Clock Configuration](https://networklessons.com/cisco/asa-firewall/cisco-asa-clock-configuration)**
>
> This lesson explains how to configure the clock on the Cisco ASA firewall manually or with NTP and also how to set the correct timezone.
---
### Author:  [@dlais1987](https://forum.networklessons.com/u/dlais1987)
#### Post date: [November 25, 2021, 5:00am UTC](https://forum.networklessons.com/t/cisco-asa-clock-configuration/836/2 "2021-11-25T05:00:35Z")
Hi Rene,
How would you set the clock timezone and daylight savings information for pacific standard time. Could you show an example of that please?
---
### Author:  [@lagapidis](https://forum.networklessons.com/u/lagapidis)
#### Post date: [November 27, 2021, 9:15am UTC](https://forum.networklessons.com/t/cisco-asa-clock-configuration/836/3 "2021-11-27T09:15:57Z")
Hello Daniel
You can achieve this with the following commands:
`ASA1(config)# clock timezone PST`
By default, daylight savings time is automatically adjusted with a recurring date range is from 2:00 AM on the second Sunday in March to 2:00 AM on the first Sunday in November. Some regions of the world change ad different times. You can change when daylight savings time will begin and when it will end using a command similar to the following:
`ASA1(config)# clock summer-time PDT 1 April 2022 2:00 60`
This will cause daylight savings time to begin on April 1st 2022, at 2 AM, and the adjustment will be a change of 60 minutes.
The above describes the commands for an ASA version 9.13. For Firepower appliances, the commands are slightly different. More on how these can be changed for both Firepower and ASA devices, take a look at the following documentation:
> **[Cisco Secure Firewall ASA - Configuration Guides](https://www.cisco.com/c/en/us/support/security/adaptive-security-appliance-asa-software/products-installation-and-configuration-guides-list.html)**
>
> Cisco Adaptive Security Appliance (ASA) Software - Some links below may open a new browser window to display the document you selected.
I hope this has been helpful!
Laz