# Cisco ASA Dynamic NAT with DMZ

**URL:** https://forum.networklessons.com/t/cisco-asa-dynamic-nat-with-dmz/814
**Category:** Lessons Discussion
**Created:** [December 19, 2016, 4:08pm UTC](https://forum.networklessons.com/t/cisco-asa-dynamic-nat-with-dmz/814 "2016-12-19T16:08:58Z")
**Posts on this page:** 1
**Showing post:** 38

<div class="post-metadata">

### Author: ![macattack003](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/m/cab0a1/32.png) [@macattack003](https://forum.networklessons.com/u/macattack003)
#### Post date: [November 4, 2019, 10:46pm UTC](https://forum.networklessons.com/t/cisco-asa-dynamic-nat-with-dmz/814/38 "2019-11-04T22:46:18Z")

</div>

Hey everyone I have a 5510 ASA and I’m trying to figure out setting up dynamic NAT with a range or pool of IPs. I’m having trouble with this task as the outside interface is setup with the first available ip out of my 5 static IPS I have. I then want to use a range of IPs to perform dynamic NAT round robin for my DMZ to outside and my inside int to the outside. Is there a better way to set this up and prevent from getting the error of the ips overlap ??

---

_[View the full topic](https://forum.networklessons.com/t/cisco-asa-dynamic-nat-with-dmz/814)._