# Cisco ASA Object Group for Access-List

**URL:** https://forum.networklessons.com/t/cisco-asa-object-group-for-access-list/822
**Category:** Lessons Discussion
**Created:** [December 19, 2016, 4:37pm UTC](https://forum.networklessons.com/t/cisco-asa-object-group-for-access-list/822 "2016-12-19T16:37:50Z")
**Posts on this page:** 1
**Showing post:** 5

<div class="post-metadata">

### Author: ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)
#### Post date: [March 11, 2016, 5:33pm UTC](https://forum.networklessons.com/t/cisco-asa-object-group-for-access-list/822/5 "2016-03-11T17:33:16Z")

</div>

Hi Asi,

The “object network” command is to configure a single object:

```auto
ASA1(config)# object network DMZ
ASA1(config-network-object)# ?

  description Specify description text
  fqdn Enter this keyword to specify an FQDN
  help Help for network object configuration commands
  host Enter this keyword to specify a single host object
  nat Enable NAT on a singleton object
  no Remove an object or description from object
  range Enter this keyword to specify a range
  subnet Enter this keyword to specify a subnet

```

Here you can refer to a single host or subnet. The network-object can be used within an object-group:

```auto
ASA1(config)# object-group network DMZ_SERVERS
ASA1(config-network-object-group)# ?

  description Specify description text
  group-object Configure an object group as an object
  help Help for network object-group configuration commands
  network-object Configure a network object
  no Remove an object or description from object-group

```

Here you can see the “network-object” command. The object-group can be used to select multiple network objects.

Rene

---

_[View the full topic](https://forum.networklessons.com/t/cisco-asa-object-group-for-access-list/822)._