Cisco ASA Remote Access VPN

[lagapidis (Lazarus Agapidis)]

Hello Sims

Take a look at this post to get an idea of how to proceed with troubleshooting with VPNs…

Cisco IPsec Easy VPN Configuration

Hello Dinesh There are a couple of things that you should keep in mind as you troubleshoot this. First of all, with EasyVPN you don’t need to configure an ACL, so all traffic is permitted, so this is not where your problem lies. This is different than a site-to-site VPN where you configure an ACL to define the traffic to encrypt. It’s possible to use an ACL to restrict traffic with EasyVPN but you haven’t done this so you’re OK here. Now you’re unable to ping from the VPN client to the web s…

This one goes into even more detail that might be enlightening.

Cisco IPsec Easy VPN Configuration

Hello Dinesh, Without going into too much detail of this specific topology, let me give some examples and tools of how to troubleshoot a problem like this. Once you know how to deal with this, you can fix any topology. Like Lazaros mentioned, you should: I’ll use this example topology. Four routers with EIGRP, full reachability: [r1-r4-topology] Traceroute Doing a trace is a good way to start. A single probe is fine: R1#traceroute 4.4.4.4 probe 1 Type escape sequence to abort. …

As you continue your troubleshooting, let us know if we can help with any more specific issues.

I hope this has been helpful!

Laz