# Cisco ASA Remove Access-List

**URL:** <https://forum.networklessons.com/t/cisco-asa-remove-access-list/821>\
**Category:** Lessons Discussion\
**Created:** [December 19, 2016, 4:37pm UTC](https://forum.networklessons.com/t/cisco-asa-remove-access-list/821 "2016-12-19T16:37:42Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)\
**Post date:** [December 21, 2016, 11:30am UTC](https://forum.networklessons.com/t/cisco-asa-remove-access-list/821/6 "2016-12-21T11:30:09Z")

</div>

Hi Hoan,

If you want to remove a single statement, you can do it like this:

```
ASA1# show run access-list 
access-list MY_ACL extended permit ip any host 192.168.1.1 
access-list MY_ACL extended permit ip any host 192.168.1.2 
access-list MY_ACL extended permit ip any host 192.168.1.3

```

Let’s remove the middle statement:

`ASA1(config)# no access-list MY_ACL extended permit ip any host 192.168.1.2`

And verify our work:

```
ASA1# show run access-list                                         
access-list MY_ACL extended permit ip any host 192.168.1.1 
access-list MY_ACL extended permit ip any host 192.168.1.3 

```

That’s it.

Rene

---

_[View the full topic](https://forum.networklessons.com/t/cisco-asa-remove-access-list/821)._