# Cisco SD-WAN Application-Aware Routing (AAR)

**URL:** https://forum.networklessons.com/t/cisco-sd-wan-application-aware-routing-aar/15073
**Category:** Lessons Discussion
**Created:** [August 5, 2021, 1:13pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-application-aware-routing-aar/15073 "2021-08-05T13:13:28Z")
**Posts on this page:** 1
**Showing post:** 5

<div class="post-metadata">

### Author: ![msstanick](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/msstanick/32/7692_2.png) [@msstanick](https://forum.networklessons.com/u/msstanick)
#### Post date: [April 8, 2025, 7:22am UTC](https://forum.networklessons.com/t/cisco-sd-wan-application-aware-routing-aar/15073/5 "2025-04-08T07:22:45Z")

</div>

Hi Laz,

You are welcome - well deserved.

About the error - it is in section: Cisco SD-WAN Controllers Installation.

You gave Org Name as nwl-sdwan-lab in the GUI conf, while every other reference when managing the certs via CLI is set to nwl-lab-sdwan.

![error]()

Due to this vEdges were visible in vManage (as the certs were signed by CA), but not registering.

I found out about this error in one of linux logs that was saying Org Name mismatch in certificate - that finally directed me to what the problem was as it took few hours and doing the lab from a scratch 🙂 No worries though - it got the skill cemented in my mind haha.

BR, Maciej Stanecki

---

_[View the full topic](https://forum.networklessons.com/t/cisco-sd-wan-application-aware-routing-aar/15073)._