# Cisco SD-WAN Plug and Play Connect Device Licenses
**URL:** https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125
**Category:** Lessons Discussion
**Created:** [August 11, 2021, 7:57pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125 "2021-08-11T19:57:58Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)
#### Post date: [August 11, 2021, 7:57pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/1 "2021-08-11T19:57:58Z")
This topic is to discuss the following lesson:
> **[Cisco SD-WAN Plug and Play Connect Device Licenses](https://networklessons.com/cisco/cisco-sd-wan/cisco-sd-wan-plug-and-play-connect-device-licenses)**
>
> This lesson explains how to create Cisco SD-WAN device licenses on the Cisco.com website and add them to the vManage controller.
---
### Author:  [@jimbo693](https://forum.networklessons.com/u/jimbo693)
#### Post date: [January 25, 2022, 7:56pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/2 "2022-01-25T19:56:29Z")
Very important lesson, thanks for that.
Still very annoying cisco did that. I am in between jobs so I have only personal account which " does not have the privileges required to access “Manage Smart Account”" , but I will open a ticket in case cisco can help.
---
### Author:  [@teckbees81](https://forum.networklessons.com/u/teckbees81)
#### Post date: [January 17, 2023, 4:22pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/3 "2023-01-17T16:22:17Z")
Quoted from the lesson:
> If you want to add vEdge or cEdge licenses to your Cisco SD-WAN network, you’ll need some device “licenses”. In Cisco SD-WAN versions before 20.x, it was possible to skip this. If you build a lab using version 20.X or later, you need to create these licenses on the [Cisco.com](http://Cisco.com) website and import them on your vManage controller. If you use version 20.x or later, follow this lesson and I’ll explain how to create these licenses.
As per above license requirement can be skipped if we use 19.x, trying to figure out how? if someone has already did it then please let me know
---
### Author:  [@teckbees81](https://forum.networklessons.com/u/teckbees81)
#### Post date: [January 19, 2023, 9:38pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/4 "2023-01-19T21:38:04Z")
If I have organization name ABCDEF, what changes are needed below to generate the Root CA
```auto
openssl req -x509 -new -nodes -key ROOT-CA.key -sha256 -days 3652 \
-subj "https://cdn.networklessons.com/C=NL/ST=NL/O=nwl-lab-sdwan/CN=vmanage1.lab.nwl.ai" \
-out ROOT-CA.pem
```
---
### Author:  [@teckbees81](https://forum.networklessons.com/u/teckbees81)
#### Post date: [February 1, 2023, 12:37am UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/5 "2023-02-01T00:37:48Z")
Any way if I want to skip the vBond IP meaning I dont want to stick with one IP. There can be any topology and I can work. I have seen one Serial.viptela File where any vBond IP can be used but that is no more valid.
Can i mention 0.0.0.0 in vBond IP and use any IP with any lab
any thought?
---
### Author:  [@lagapidis](https://forum.networklessons.com/u/lagapidis)
#### Post date: [February 3, 2023, 6:20am UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/6 "2023-02-03T06:20:11Z")
Hello Asif
The particular attributes that are in your post are X.509 attributes. In particular, they are:
CN: CommonName
OU: OrganizationalUnit
O: Organization
L: Locality
S: StateOrProvinceName
C: CountryName
If you want to change the organization name to ABDCDEF you would change the “O” attribute like so:
O=ABCDEF
For more info about the X.509 certificate attributes, take a look at this [documentation](https://docs.oracle.com/cd/E24191_01/common/tutorials/authz_cert_attributes.html).
As for the vBond IP, when you onboard a vEdge, you must specify the IP address of the vBond controller as seen in the initial config of the vEdge device here:
> **[Cisco SD-WAN vEdge Onboarding](https://networklessons.com/cisco/cisco-sd-wan/cisco-sd-wan-vedge-onboarding)**
>
> This lesson explains how to onboard Cisco SD-WAN vEdge routers with the vManage, vBond, and vSmart controllers.
The question is, can you use 0.0.0.0 as the vBond IP address or any other IP address? This is strictly a licensing issue, and the only way to find out is to try. Can you do a bit of experimentation and let us know what results you get?
I hope this has been helpful!
Laz
---
### Author:  [@CorwynJohnson](https://forum.networklessons.com/u/CorwynJohnson)
#### Post date: [April 4, 2024, 7:55pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/7 "2024-04-04T19:55:21Z")
Is there a workaround for not having a business account? I don’t want to use the 20.x code but I will if I have to.
---
### Author:  [@sathish84be](https://forum.networklessons.com/u/sathish84be)
#### Post date: [November 17, 2024, 7:07pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/8 "2024-11-17T19:07:07Z")
Hello Networklesson Team,
I am also facing same issue, can we onboard vEdge and do a lab without this license ?.
Is there any workaround to get the smart account for lab purpose to get device license ?.
or do we only use the lower version for lab purposes?
---
### Author:  [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)
#### Post date: [December 18, 2024, 2:29pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/9 "2024-12-18T14:29:37Z")
I did some more digging for this. For 20.x, if you want vEdge routers, you’ll need device licenses and get them through a smart account. There is no other way.
It seems however that you can add Cisco Catalyst 8000V routers with the “pay as you go” licenses. You won’t have to generate device licenses for these. You can find an example here:
> **[Cisco Catalyst SD-WAN Getting Started Guide - Install and Upgrade for Cisco...](https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/sdwan-xe-gs-book/install-upgrade-17-2-later.html)**
>
> Install and Upgrade for Cisco Cisco IOS XE Catalyst SD-WAN Release 17.2.1r and Later
I haven’t tried it but I will. Just upgraded Cisco CML to include the SD-WAN images. I’ll see if I can make it work.
Rene