# Cisco SD-WAN Plug and Play Connect Device Licenses **URL:** https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125 **Category:** Lessons Discussion **Created:** [August 11, 2021, 7:57pm UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125 "2021-08-11T19:57:58Z") **Posts on this page:** 1 **Showing post:** 6
### Author: ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis) #### Post date: [February 3, 2023, 6:20am UTC](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125/6 "2023-02-03T06:20:11Z")
Hello Asif The particular attributes that are in your post are X.509 attributes. In particular, they are: CN: CommonName OU: OrganizationalUnit O: Organization L: Locality S: StateOrProvinceName C: CountryName If you want to change the organization name to ABDCDEF you would change the “O” attribute like so: O=ABCDEF For more info about the X.509 certificate attributes, take a look at this [documentation](https://docs.oracle.com/cd/E24191_01/common/tutorials/authz_cert_attributes.html). As for the vBond IP, when you onboard a vEdge, you must specify the IP address of the vBond controller as seen in the initial config of the vEdge device here: > **[Cisco SD-WAN vEdge Onboarding](https://networklessons.com/cisco/cisco-sd-wan/cisco-sd-wan-vedge-onboarding)** > > This lesson explains how to onboard Cisco SD-WAN vEdge routers with the vManage, vBond, and vSmart controllers. The question is, can you use 0.0.0.0 as the vBond IP address or any other IP address? This is strictly a licensing issue, and the only way to find out is to try. Can you do a bit of experimentation and let us know what results you get? I hope this has been helpful! Laz --- _[View the full topic](https://forum.networklessons.com/t/cisco-sd-wan-plug-and-play-connect-device-licenses/15125)._