# Cisco Wireless LAN Controller (WLC) Basic Configuration

**URL:** <https://forum.networklessons.com/t/cisco-wireless-lan-controller-wlc-basic-configuration/8604>\
**Category:** Lessons Discussion\
**Created:** [October 21, 2019, 2:47pm UTC](https://forum.networklessons.com/t/cisco-wireless-lan-controller-wlc-basic-configuration/8604 "2019-10-21T14:47:13Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![bluerfoot](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/b/c67d28/32.png) [@bluerfoot](https://forum.networklessons.com/u/bluerfoot)\
**Post date:** [November 10, 2019, 2:16pm UTC](https://forum.networklessons.com/t/cisco-wireless-lan-controller-wlc-basic-configuration/8604/2 "2019-11-10T14:16:53Z")

</div>

questions: do you need to configure vlans 20 and 30 on the switch? I don’t see these int the video (just vlan interfaces) and also why do you need to specify the dhcp server (switch) in the initial setup since the clients would be getting their ip addresses from the switch presumably before connecting to the wlc? Thanks.

---

_[View the full topic](https://forum.networklessons.com/t/cisco-wireless-lan-controller-wlc-basic-configuration/8604)._
