# Classification and Marking on Cisco Switch **URL:** \ **Category:** Lessons Discussion\ **Created:** [December 20, 2016, 9:45pm UTC](https://forum.networklessons.com/t/classification-and-marking-on-cisco-switch/857 "2016-12-20T21:45:17Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![system](https://cdn-forum.networklessons.com/uploads/default/original/1X/1d2ef66728c7fbac8377748594345a3f474fce5f.png) [@system](https://forum.networklessons.com/u/system)\ **Post date:** [May 13, 2014, 1:24pm UTC](https://forum.networklessons.com/t/classification-and-marking-on-cisco-switch/857/2 "2014-05-13T13:24:02Z")
Hi Rene, i like your blog and web gns3vault I’ve a question because i’m doing troubleshooting with qos in switches and when i look at the policy i don’t see what i expect to see. i have applied a policy fa0/1 input. i inject traffic but i don’t see ever increasing packet. Could it be because it is a switch ? when is a router i see increases C3560-24TS\_1#sh policy-map interface FastEthernet0/1 Service-policy input: QoS\_In ``` Class-map: Clase_Gestion (match-all) 0 packets, 0 bytes offered rate 0 bps, drop rate 0 bps Match: ip precedence 7 Class-map: Clase_Voz (match-all) 0 packets, 0 bytes offered rate 0 bps, drop rate 0 bps Match: access-group 112 Class-map: Clase_Oro (match-all) 0 packets, 0 bytes offered rate 0 bps, drop rate 0 bps Match: access-group 111 Class-map: class-default (match-any) 0 packets, 0 bytes offered rate 0 bps, drop rate 0 bps Match: any 0 packets, 0 bytes rate 0 bps ``` thanks --- _[View the full topic](https://forum.networklessons.com/t/classification-and-marking-on-cisco-switch/857)._