# Configuration Change Notification and Logging **URL:** https://forum.networklessons.com/t/configuration-change-notification-and-logging/1057 **Category:** Lessons Discussion **Created:** [December 26, 2016, 7:04pm UTC](https://forum.networklessons.com/t/configuration-change-notification-and-logging/1057 "2016-12-26T19:04:13Z") **Posts on this page:** 1 **Showing post:** 5
### Author: ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar) #### Post date: [March 7, 2016, 12:44pm UTC](https://forum.networklessons.com/t/configuration-change-notification-and-logging/1057/5 "2016-03-07T12:44:36Z")
Hi Adekunle, IOS XR has a similar mechanism. You can view the commit list and its changes: ```auto RP/0/0/CPU0:ios#show configuration commit list Mon Mar 7 11:44:19.885 UTC SNo. Label/ID User Line Client Time Stamp ~~~~~~~~~~~~ ~~~~~~~~ ~~~~~~~~~~~~~~~~ 1 1000000002 cisco con0_0_CPU0 CLI Mon Mar 7 11:44:17 2016 2 1000000001 cisco con0_0_CPU0 CLI Mon Mar 7 11:43:48 2016 ``` Above you can see two changes have been made through the CLI. Here’s what the first change looks like: ```auto RP/0/0/CPU0:ios#show configuration commit changes 1000000001 Mon Mar 7 11:44:53.743 UTC Building configuration... !! IOS XR Configuration 6.0.0 interface GigabitEthernet0/0/0/0 ipv4 address 192.168.1.1 255.255.255.0 ! end ``` In the first change, only an IPv4 address was configured on the Gigabit interface. Hope this helps. Rene --- _[View the full topic](https://forum.networklessons.com/t/configuration-change-notification-and-logging/1057)._