# CoPP (Control Plane Policing)

**URL:** https://forum.networklessons.com/t/copp-control-plane-policing/4602
**Category:** Lessons Discussion
**Created:** [August 13, 2018, 1:09pm UTC](https://forum.networklessons.com/t/copp-control-plane-policing/4602 "2018-08-13T13:09:40Z")
**Posts on this page:** 1
**Showing post:** 8

<div class="post-metadata">

### Author: ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)
#### Post date: [October 15, 2018, 12:07pm UTC](https://forum.networklessons.com/t/copp-control-plane-policing/4602/8 "2018-10-15T12:07:00Z")

</div>

Hi Angelos,

I don’t have a 7000 to test with but on my 5548 (7.3(1)N1), it does show up with this command:

```
NX1# show policy-map interface control-plane 
Control Plane

  service-policy input: copp-system-policy-customized

    class-map copp-system-class-igmp (match-any)
      match protocol igmp
      police cir 1024 kbps , bc 65535 bytes 
        conformed 0 bytes; action: transmit 
        violated 0 bytes;
    class-map copp-system-class-pim-hello (match-any)
      match protocol pim
      police cir 1024 kbps , bc 4800000 bytes 
        conformed 0 bytes; action: transmit 
        violated 0 bytes;
    class-map copp-system-class-bridging (match-any)
      match protocol bridging
      police cir 20000 kbps , bc 4800000 bytes 
        conformed 0 bytes; action: transmit 
        violated 0 bytes;
```

It doesn’t show up on the 7000 like this?

Rene

---

_[View the full topic](https://forum.networklessons.com/t/copp-control-plane-policing/4602)._