# DMVPN HUB Private address

**URL:** <https://forum.networklessons.com/t/dmvpn-hub-private-address/9105>\
**Category:** General\
**Created:** [December 7, 2019, 10:12am UTC](https://forum.networklessons.com/t/dmvpn-hub-private-address/9105 "2019-12-07T10:12:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![robertgombe](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/r/f6c823/32.png) [@robertgombe](https://forum.networklessons.com/u/robertgombe)\
**Post date:** [December 7, 2019, 10:12am UTC](https://forum.networklessons.com/t/dmvpn-hub-private-address/9105/1 "2019-12-07T10:12:48Z")

</div>

Hi Guys,

I would like to know, i configured a DMVPN and used a private ip address as my tunnel source. I then natted that private to a public ip on the firewall. The DMVPN can up but on the HUB under show ip DMVPN i see my private ip. Just would like someone to explain this is possible I would upload some config but this was on a device on production. But if this will help get me an response i can make a plan.

Regard

---

<div class="post-metadata">

**Author:** ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis)\
**Post date:** [December 8, 2019, 9:12am UTC](https://forum.networklessons.com/t/dmvpn-hub-private-address/9105/2 "2019-12-08T09:12:15Z")

</div>

A post was merged into an existing topic: [Introduction to DMVPN](https://forum.networklessons.com/t/introduction-to-dmvpn/1300)

---

<div class="post-metadata">

**Author:** ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis)\
**Post date:** [December 8, 2019, 9:12am UTC](https://forum.networklessons.com/t/dmvpn-hub-private-address/9105/3 "2019-12-08T09:12:15Z")

</div>