# DMVPN Phase 3 OSPF Routing **URL:** https://forum.networklessons.com/t/dmvpn-phase-3-ospf-routing/1314 **Category:** Lessons Discussion **Created:** [December 29, 2016, 8:32pm UTC](https://forum.networklessons.com/t/dmvpn-phase-3-ospf-routing/1314 "2016-12-29T20:32:11Z") **Posts on this page:** 1 **Showing post:** 3
### Author: ![ReneMolenaar](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/renemolenaar/32/488_2.png) [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar) #### Post date: [January 13, 2016, 3:11pm UTC](https://forum.networklessons.com/t/dmvpn-phase-3-ospf-routing/1314/3 "2016-01-13T15:11:23Z")
Hi Harvinder, Take a look below: ```auto Spoke2#show dmvpn Legend: Attrb --> S - Static, D - Dynamic, I - Incomplete N - NATed, L - Local, X - No Socket T1 - Route Installed, T2 - Nexthop-override C - CTS Capable # Ent --> Number of NHRP entries with same NBMA peer NHS Status: E --> Expecting Replies, R --> Responding, W --> Waiting UpDn Time --> Up or Down Time for a Tunnel ========================================================================== Interface: Tunnel0, IPv4 NHRP Details Type:Spoke, NHRP Peers:2, # Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb ----- --------------- --------------- ----- -------- ----- 2 192.168.123.2 172.16.123.2 UP 00:01:27 DT2 172.16.123.2 UP 00:01:27 DT2 1 192.168.123.1 172.16.123.1 UP 00:02:57 S ``` Above you can see two entries for the spoke1 router. When we add the **detail** parameter, you can see why there are two entries: ```auto Spoke2#show dmvpn detail Legend: Attrb --> S - Static, D - Dynamic, I - Incomplete N - NATed, L - Local, X - No Socket T1 - Route Installed, T2 - Nexthop-override C - CTS Capable # Ent --> Number of NHRP entries with same NBMA peer NHS Status: E --> Expecting Replies, R --> Responding, W --> Waiting UpDn Time --> Up or Down Time for a Tunnel ========================================================================== Interface Tunnel0 is up/up, Addr. is 172.16.123.3, VRF "" Tunnel Src./Dest. addr: 192.168.123.3/MGRE, Tunnel VRF "" Protocol/Transport: "multi-GRE/IP", Protect "" Interface State Control: Disabled nhrp event-publisher : Disabled IPv4 NHS: 172.16.123.1 RE priority = 0 cluster = 0 Type:Spoke, Total NBMA Peers (v4/v6): 3 # Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb Target Network ----- --------------- --------------- ----- -------- ----- ----------------- 2 192.168.123.2 172.16.123.2 UP 00:01:52 DT2 2.2.2.2/32 192.168.123.2 172.16.123.2 UP 00:01:52 DT2 172.16.123.2/32 1 192.168.123.3 172.16.123.3 UP 00:01:52 DLX 3.3.3.3/32 1 192.168.123.1 172.16.123.1 UP 00:03:22 S 172.16.123.1/32 ``` There’s an entry for 2.2.2.2/32 and 172.16.123.2/32 network. Hope this helps. Rene --- _[View the full topic](https://forum.networklessons.com/t/dmvpn-phase-3-ospf-routing/1314)._