# DMVPN Phase 3 OSPF Routing **URL:** https://forum.networklessons.com/t/dmvpn-phase-3-ospf-routing/1314 **Category:** Lessons Discussion **Created:** [December 29, 2016, 8:32pm UTC](https://forum.networklessons.com/t/dmvpn-phase-3-ospf-routing/1314 "2016-12-29T20:32:11Z") **Posts on this page:** 1 **Showing post:** 4
### Author: ![lordly.mathews](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/l/8e8cbc/32.png) [@lordly.mathews](https://forum.networklessons.com/u/lordly.mathews) #### Post date: [February 6, 2017, 3:08pm UTC](https://forum.networklessons.com/t/dmvpn-phase-3-ospf-routing/1314/4 "2017-02-06T15:08:09Z")
> [@ReneMolenaar](#): > > ========================================================================== Rene I set this up, Spoke still use Hub as next-hop, Spoke 2 is fine but Spoke 1 still shows 172.6.132.1 as next hop in cef see output below ``` Spoke 2 Spoke2#traceroute 2.2.2.2 source loopback 0 Type escape sequence to abort. Tracing the route to 2.2.2.2 VRF info: (vrf in name/id, vrf out name/id) 1 172.16.123.1 32 msec 28 msec 24 msec 2 172.16.123.2 76 msec 32 msec * Spoke2#show ip cef 2.2.2.2 2.2.2.2/32 nexthop 172.16.123.2 Tunnel0 ``` - ``` Spoke 1 Spoke1#traceroute 3.3.3.3 source loopback 0 Type escape sequence to abort. Tracing the route to 3.3.3.3 VRF info: (vrf in name/id, vrf out name/id) 1 172.16.123.1 28 msec 52 msec 28 msec 2 172.16.123.3 52 msec 44 msec * Spoke1#show ip cef 3.3.3.3 3.3.3.3/32 nexthop 172.16.123.1 Tunnel0 ``` I checked all Tun0 configs, ip nhrp redirect, and ip nhrp shortcut are on the Tun0. All 3 routers are using same code 15.2(4)M6 Adv Enteprise. Please advise. Thanks --- _[View the full topic](https://forum.networklessons.com/t/dmvpn-phase-3-ospf-routing/1314)._