# EIGRP Static Neighbor **URL:** https://forum.networklessons.com/t/eigrp-static-neighbor/1244 **Category:** Lessons Discussion **Created:** [December 29, 2016, 5:48pm UTC](https://forum.networklessons.com/t/eigrp-static-neighbor/1244 "2016-12-29T17:48:29Z") **Posts on this page:** 1 **Showing post:** 6
### Author: ![andrew](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/andrew/32/645_2.png) [@andrew](https://forum.networklessons.com/u/andrew) #### Post date: [February 16, 2016, 2:16pm UTC](https://forum.networklessons.com/t/eigrp-static-neighbor/1244/6 "2016-02-16T14:16:40Z")
Also, when you tested this in your lab, did you confirm your EIGRP neighbor relationship? For example, if you haven’t statically configured R1 and R2 as being neighbors, you must include the network segment they share as part of the network statement under the EIGRP process. You can verify your routers have neighbors by doing the following: ```auto R2#sh ip eigrp neighbors EIGRP-IPv4 Neighbors for AS(1) H Address Interface Hold Uptime SRTT RTO Q Seq (sec) (ms) Cnt Num 0 10.1.1.1 Fa0/0 13 00:00:06 1 3000 0 1 ``` --- _[View the full topic](https://forum.networklessons.com/t/eigrp-static-neighbor/1244)._