# Encor Labs
**URL:** https://forum.networklessons.com/t/encor-labs/10376
**Category:** CCNP ENCOR
**Created:** [March 22, 2020, 3:56am UTC](https://forum.networklessons.com/t/encor-labs/10376 "2020-03-22T03:56:58Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Derekwrxsti](https://forum.networklessons.com/u/Derekwrxsti)
#### Post date: [March 22, 2020, 3:56am UTC](https://forum.networklessons.com/t/encor-labs/10376/1 "2020-03-22T03:56:58Z")
I am new to [NetworkLessons.com](http://NetworkLessons.com) and I am looking for the labs for the Encor and Enarsi classes. Where would I find those?
---
### Author:  [@lagapidis](https://forum.networklessons.com/u/lagapidis)
#### Post date: [March 22, 2020, 8:34am UTC](https://forum.networklessons.com/t/encor-labs/10376/2 "2020-03-22T08:34:53Z")
Hello Derek
The content of the NetworkLessons site for ENARSI and ENCOR can be found at the following course links:
> **[CCNP ENCOR 350-401 - NetworkLessons.com](https://networklessons.com/cisco/ccnp-encor-350-401)**
>
> This course covers everything in CCNP ENCOR 350-401. You will learn about a whole range of protocols and techniques we use on Cisco routers and switches.
> **[CCNP ENARSI 300-410 - NetworkLessons.com](https://networklessons.com/cisco/ccnp-enarsi-300-410)**
>
> The CCNP ENARSI 300-410 course covers all topics on the Cisco blueprint. We explain everything step-by-step, as simple as possible.
In these lessons, you will find a topology for each, and the configurations used. You can follow along by creating your own topologies using GNS3, VIRL, and in some cases, Packet Tracer. The preconfigured labs are not directly available.
However you have a couple of choices. First, you can go to [gns3vault.com](https://gns3vault.com) which has many free GNS3 lab scenarios that you can use as your base labs. Find a lab that matches as much as possible, and then complete the lesson by making your adjustments.
Alternatively, you can proceed with the suggestion that Rene offers in this post:
> [@CCIE R&S Lab Equipment](https://forum.networklessons.com/t/ccie-r-s-lab-equipment/1128/43):
>
> Hi Robert, Once I have a list, I’ll make sure it’s easy to find. The R&S part is no problem with the CSR 1000v, IOSv, and IOSv2-L2 images. If you study on your own, I would create two topologies. You could do this in VIRL. A topology with 4 switches, two links between every switch. Connect 1-2 routers to each switch that you can use as a host. A topology with 8-10 routers, something like this: Pre-configure these routers with IP addresses and multiple loopback interfaces. Yo…
Although it is for CCIE, the concept is the same.
I hope this has been helpful!
Laz