# Frame relay still include?

**URL:** <https://forum.networklessons.com/t/frame-relay-still-include/5091>\
**Category:** CCNA R&S\
**Created:** [October 5, 2018, 2:46am UTC](https://forum.networklessons.com/t/frame-relay-still-include/5091 "2018-10-05T02:46:32Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![d.guntur12](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/d/7feea3/32.png) [@d.guntur12](https://forum.networklessons.com/u/d.guntur12)\
**Post date:** [October 5, 2018, 2:46am UTC](https://forum.networklessons.com/t/frame-relay-still-include/5091/1 "2018-10-05T02:46:32Z")

</div>

Hi,  
Is the lessons updated for CCNA certification? because it still includes Frame Relay, since base on the material the Frame Relay is not included.

Thank you for the response.

---

<div class="post-metadata">

**Author:** ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis)\
**Post date:** [October 11, 2018, 9:25am UTC](https://forum.networklessons.com/t/frame-relay-still-include/5091/2 "2018-10-11T09:25:06Z")

</div>

Hello Muhammad

Yes, you are correct in that the new content does not include frame relay. However, the rest of the topics are covered based on the exam topics published by Cisco below:

> **[Cisco Learning Network](https://learningnetwork.cisco.com/s/ccna-exam-topics)**

I hope this has been helpful!

Laz

---

<div class="post-metadata">

**Author:** ![d.guntur12](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/d/7feea3/32.png) [@d.guntur12](https://forum.networklessons.com/u/d.guntur12)\
**Post date:** [October 17, 2018, 8:18am UTC](https://forum.networklessons.com/t/frame-relay-still-include/5091/3 "2018-10-17T08:18:25Z")

</div>

Thank you for the response. really appreciate it,

---

<div class="post-metadata">

**Author:** ![joseph](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/joseph/32/2869_2.png) [@joseph](https://forum.networklessons.com/u/joseph)\
**Post date:** [June 11, 2020, 11:36am UTC](https://forum.networklessons.com/t/frame-relay-still-include/5091/4 "2020-06-11T11:36:56Z")

</div>

Hi Laz,

With regards to the CCNA, CCNP and CCIE (Routing and Switching for all) is Frame relay now dead?

---

<div class="post-metadata">

**Author:** ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis)\
**Post date:** [June 13, 2020, 5:13am UTC](https://forum.networklessons.com/t/frame-relay-still-include/5091/5 "2020-06-13T05:13:22Z")

</div>

Hello Joseph

Take a look at this post. Although it refers specifically to the CCNP certification, the principle is the same for all level certifications.

> [@OSPF Point-to-Multipoint Network Type over Frame-Relay](https://forum.networklessons.com/t/ospf-point-to-multipoint-network-type-over-frame-relay/919/9):
>
> Hello Jorge You’re absolutely right that Frame-Relay is no longer part of any Cisco certification exams. However, the various OSPF types are (3.2.b in the [official Cisco exam topics list](https://learningnetwork.cisco.com/s/encor-exam-topics).). The point to point OSPF network type can only be examined using a Frame-Relay topology. DMVPN does not use this network type for OSPF. Also keep in mind this very important statement that Cisco always makes, which is found in the exam description of all of their certifications, including the link I share…

I hope this has been helpful!

Laz

---

<div class="post-metadata">

**Author:** ![joseph](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/joseph/32/2869_2.png) [@joseph](https://forum.networklessons.com/u/joseph)\
**Post date:** [June 13, 2020, 2:15pm UTC](https://forum.networklessons.com/t/frame-relay-still-include/5091/6 "2020-06-13T14:15:52Z")

</div>

Excellent, thanks Laz. Much appreciated.