# How to configure Policy Based Routing **URL:** \ **Category:** Lessons Discussion\ **Created:** [December 24, 2016, 6:19pm UTC](https://forum.networklessons.com/t/how-to-configure-policy-based-routing/945 "2016-12-24T18:19:41Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![Openlearner](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/o/ad7895/32.png) [@Openlearner](https://forum.networklessons.com/u/Openlearner)\ **Post date:** [February 2, 2015, 2:53am UTC](https://forum.networklessons.com/t/how-to-configure-policy-based-routing/945/6 "2015-02-02T02:53:54Z")
Hi Rene, I have a question and it’s not in any of the subjects, maybe you can answer it. I have a router with 2 interfaces: G0/1–\> ip address 172.16.254.6/30, G0/2–\> 172.16.254.2/30, running OSPF. G0/1 Connects to my MASTER firewall with ip add 172.16.254.1/30 and G0/2 connects to my SECONDARY firewall with ip address 172.16.254.1, the firewalls are configure HA. If I try to configure G0/2 with an ip add of 172.16.254.3 it gives me an error. How can I make this scenario work with the 2 interfaces and the firewalls? or Do I need to get a switch module with 2 interfaces and configure a vlan? Please advise --- _[View the full topic](https://forum.networklessons.com/t/how-to-configure-policy-based-routing/945)._