# InterVLAN Routing **URL:** \ **Category:** Lessons Discussion\ **Created:** [December 27, 2016, 4:35pm UTC](https://forum.networklessons.com/t/intervlan-routing/1147 "2016-12-27T16:35:36Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![jtharvey](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/j/bc79bd/32.png) [@jtharvey](https://forum.networklessons.com/u/jtharvey)\ **Post date:** [January 9, 2015, 2:58pm UTC](https://forum.networklessons.com/t/intervlan-routing/1147/2 "2015-01-09T14:58:34Z")
Rene, I have a Cisco SG300-28 PoE+ switch and am having an old age moment in setting up VLans. Would you know the answer to or be able to assist with the following: My network has: 1 router, which also handles DHCP duties with one range currently specified 192.168.1.x/24 1 switch 1 WAP and about 40 nodes I want to create multiple VLANS on the Cisco SG300 switch. Vlan10 - Mgmnt Vlan20 - Children Vlan30 - AV Vlan40 - Automation Vlan50 - VoIP Vlan60 - Guest What are the steps necessary after creating the Vlans in this scenario to make things work? WAP is on port 1 of the switch ROUTER is on port 2 of the switch I am using a browser to access and manage the Cisco SG300-28PP switch I currently have the switch in L3 mode. I was planning on establishing the following network ranges to match Vlan IDs. Vlan10 - Mgmnt - 192.168.10.x/24 Vlan20 - Children - 192.168.20.x/24 Vlan30 - AV - 192.168.30.x/24 Vlan40 - Automation - 192.168.40.x/24 Vlan50 - VoIP - 192.168.50.x/24 Vlan60 - Guest - 192.168.60.x/24 In each network range I will be using x.x.x.200 to x.x.x.230 as the DHCP range What is necessary to accomplish all of this? --- _[View the full topic](https://forum.networklessons.com/t/intervlan-routing/1147)._