# Introduction to Redistribution

**URL:** https://forum.networklessons.com/t/introduction-to-redistribution/946
**Category:** Lessons Discussion
**Created:** [December 24, 2016, 6:20pm UTC](https://forum.networklessons.com/t/introduction-to-redistribution/946 "2016-12-24T18:20:55Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![saschadressler](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/s/ba8739/32.png) [@saschadressler](https://forum.networklessons.com/u/saschadressler)
#### Post date: [February 20, 2015, 10:49am UTC](https://forum.networklessons.com/t/introduction-to-redistribution/946/2 "2015-02-20T10:49:31Z")

</div>

Hey René,  
you missed something in the command syntax. After I have read your lesson, I tried the example. With the shown syntax John still doesn’t advertise the Loopback addresses and the connected network. You probably wrote it in the lesson, but I had to complete:

```
John(config)#router eigrp 12
John(config-router)#redistribute rip
John(config-router)#redistribute connected

John(config)#router rip
John(config-router)#redistribute eigrp 12
John(config-router)#redistribute connected

```

With this syntax, John started to advertise the Loopback and his directly connected networks. I hope it’s no mistake from my side.

Have a good one!

---

_[View the full topic](https://forum.networklessons.com/t/introduction-to-redistribution/946)._