# IP SLA and EEM Script **URL:** https://forum.networklessons.com/t/ip-sla-and-eem-script/1334 **Category:** Lessons Discussion **Created:** [December 29, 2016, 8:54pm UTC](https://forum.networklessons.com/t/ip-sla-and-eem-script/1334 "2016-12-29T20:54:33Z") **Posts on this page:** 1 **Showing post:** 13
### Author: ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis) #### Post date: [October 31, 2020, 6:42am UTC](https://forum.networklessons.com/t/ip-sla-and-eem-script/1334/13 "2020-10-31T06:42:32Z")
Hello Temitope If you want to measure jitter using the IP SLA feature, then you must use an IP SLA responder, otherwise you will not get any response from the other end. There is no other way to implement the IP SLA jitter analyzer. If you want to measure jitter over a particular link, there are other tools that you can use. These include using monitoring software such as Solarwinds, or other tools such as [Etherate](https://github.com/jwbensley/etherate), which is developed on Github. Alternatively, you can configure a Raspberry Pi as an SLA rsponder, so you can physically connect it to the far end and achieve your SLA measurements. Take a look at the following post for more details about that… > [@Raspberry Pi - SLA Responder](https://forum.networklessons.com/t/raspberry-pi-sla-responder/12081/2): > > Hello Aaron I haven’t personally implemented something like this, but doing some research, I have found some developers creating an IP SLA responder for Linux. If you do a search on Github or Gitlab you’ll find some. Or use your favourite search engine to find ip sla software for linux. Since Raspberry Pi uses Linux, it can be applied to them as well. It may take a bit of research, but it can be a very useful thing to develop! I hope this has been helpful! Laz I hope this has been helpful! Laz --- _[View the full topic](https://forum.networklessons.com/t/ip-sla-and-eem-script/1334)._