# Ipv6 eui-64

**URL:** <https://forum.networklessons.com/t/ipv6-eui-64/4744>\
**Category:** IPv6\
**Created:** [August 27, 2018, 1:30pm UTC](https://forum.networklessons.com/t/ipv6-eui-64/4744 "2018-08-27T13:30:27Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis)\
**Post date:** [March 4, 2021, 7:34am UTC](https://forum.networklessons.com/t/ipv6-eui-64/4744/12 "2021-03-04T07:34:05Z")

</div>

Hello Daniel

Yes, you are correct about the prefixes, they should be higher as you say. I have since corrected my [previous post](https://forum.networklessons.com/t/ipv6-eui-64/4744/10).

Now concerning the prefixes delivered by ISPs, there is no hard and fast rule that says that ISPs must deliver /64 prefixes or /48 prefixes. These are general guidelines that many organizations do follow but not all. Also remember that the ISP that delivers the prefix to the end customer may also be a customer themselves, of another ISP, from whom they purchased the IPv6 address space. So they may have been provided the /48 which they break down further into /64 for their customers.

So it really depends on the policies provided by your ISP. Keep in mind that the various sections of an IPv6 address, that is the global routing prefix, the subnet ID and the interface ID are actually of variable sizes. You can see more detail in the following post as well.

> [@IPv6 Address Types](https://forum.networklessons.com/t/ipv6-address-types/1260/28):
>
> Hello Muhammad IPv4 is designed to have a specific structure. This means that an IPv4 address has a network portion and a host portion. The size of each portion of the address depends on the subnet mask. IPv6 works similarly in the fact that we have a prefix which separates the address into two sections as well: The Prefix and the Interface ID. Their names are different than IPv4 but they’re essentially the same thing. Now for the purposes of organization, the Prefix is often separated in…

Finally, about the use of link-local addresses for routing protocols, routing protocols can actually use global unicast addresses as next-hop addresses, but that’s not the default behavior of protocols such as OSPFv3. You can for example create a static route to a global unicast address and it will work just fine.

I hope this has been helpful!

Laz

---

_[View the full topic](https://forum.networklessons.com/t/ipv6-eui-64/4744)._
