# MPLS TE FRR RSVP Hello Support
**URL:** https://forum.networklessons.com/t/mpls-te-frr-rsvp-hello-support/33254
**Category:** Lessons Discussion
**Created:** [December 23, 2022, 9:15am UTC](https://forum.networklessons.com/t/mpls-te-frr-rsvp-hello-support/33254 "2022-12-23T09:15:04Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@ReneMolenaar](https://forum.networklessons.com/u/ReneMolenaar)
#### Post date: [December 23, 2022, 9:15am UTC](https://forum.networklessons.com/t/mpls-te-frr-rsvp-hello-support/33254/1 "2022-12-23T09:15:04Z")
This topic is to discuss the following lesson:
> **[MPLS TE FRR RSVP Hello Support](https://networklessons.com/mpls/mpls-te-frr-rsvp-hello-support)**
>
> RSVP hello messages use requests and acknowledgments. When a router does not receive ACKs, it triggers a MPLS TE Fast Reroute (FRR)
---
### Author:  [@networklessonstudyte](https://forum.networklessons.com/u/networklessonstudyte)
#### Post date: [June 26, 2025, 10:06pm UTC](https://forum.networklessons.com/t/mpls-te-frr-rsvp-hello-support/33254/2 "2025-06-26T22:06:42Z")
Hello
I just have one question, in the ilustration I can see clearly we setup a backup tunnel from P1 to P4 but after looking the configuration I noticed the destination of the tunnel points to 4.4.4.4 which belongs to P2 and not P4, is this a typo error or is there something I am missing?
---
### Author:  [@lagapidis](https://forum.networklessons.com/u/lagapidis)
#### Post date: [June 30, 2025, 5:10am UTC](https://forum.networklessons.com/t/mpls-te-frr-rsvp-hello-support/33254/3 "2025-06-30T05:10:06Z")
Hello Prisyla
Indeed, in the configuration of P1, we do see Tunnel2 configured with a tunnel destination of 4.4.4.4 which is P2, and it should be 6.6.6.6 which is P4. Thanks for pointing that out, I will let Rene know to take a look and consider making the necessary modifications.
Thanksa again!
Laz