PE1#show mpls forwarding-table 7.7.7.7 detail
Local Outgoing Prefix Bytes Label Outgoing Next Hop
Label Label or Tunnel Id Switched interface
24 Pop Label 7.7.7.7/32 0 Tu1 point2point
The above shows label 24, but this result shows label 26.
PE1#traceroute 7.7.7.7 source Loopback 0 numeric probe 1
Type escape sequence to abort.
Tracing the route to 7.7.7.7
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.23.3 [MPLS: Label 26 Exp 0] 4 msec
2 192.168.36.6 4 msec
3 192.168.67.7 6 msec
And I find the same thing in my GNS3 lab. The actual MPLS label is not the label shown by command "show mpls forwarding-table 7.7.7.7 detail ". Can you please explain why? Thanks.