# QOS,services policy on switch

**URL:** <https://forum.networklessons.com/t/qos-services-policy-on-switch/5097>\
**Category:** Quality of Service\
**Created:** [October 5, 2018, 8:25pm UTC](https://forum.networklessons.com/t/qos-services-policy-on-switch/5097 "2018-10-05T20:25:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pedoulvs](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/pedoulvs/32/1185_2.png) [@pedoulvs](https://forum.networklessons.com/u/pedoulvs)\
**Post date:** [October 5, 2018, 8:25pm UTC](https://forum.networklessons.com/t/qos-services-policy-on-switch/5097/1 "2018-10-05T20:25:39Z")

</div>

how to limit speed internet on switch?

---

<div class="post-metadata">

**Author:** ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis)\
**Post date:** [October 11, 2018, 10:20am UTC](https://forum.networklessons.com/t/qos-services-policy-on-switch/5097/2 "2018-10-11T10:20:24Z")

</div>

Hello Pich

You can limit the allowable speeds on an interface of a device by using either Traffic Policing or Traffic Shaping. Policing will drop the exceeding traffic and shaping will buffer it. You can find out more information about both of these features at the following two lessons:

> **[QoS Traffic Policing Explained](https://networklessons.com/quality-of-service/qos-traffic-policing-explained)**
>
> In this lesson, we'll explain single rate, two-color, dual token bucket with single/dual rates policing, CIR vs PIR and more.

> **[QoS Traffic Shaping Explained](https://networklessons.com/quality-of-service/qos-traffic-shaping-explained)**
>
> This lesson explains Traffic Shaping and what the TC (time interval), BC (burst conform), BE (burst exceed) means.

I hope this has been helpful!

Laz
