# Reflexive Access List **URL:** https://forum.networklessons.com/t/reflexive-access-list/1030 **Category:** Lessons Discussion **Created:** [December 26, 2016, 6:23pm UTC](https://forum.networklessons.com/t/reflexive-access-list/1030 "2016-12-26T18:23:30Z") **Posts on this page:** 1 **Showing post:** 5
### Author: ![ibmufa](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/i/3e96dc/32.png) [@ibmufa](https://forum.networklessons.com/u/ibmufa) #### Post date: [September 26, 2013, 5:56am UTC](https://forum.networklessons.com/t/reflexive-access-list/1030/5 "2013-09-26T05:56:31Z")
Rene, I have been working on access-lists and NAT on my little lab. I have a Cisco router connected to a D Link router that is in turn connected to a vonage router which in turn connects to a Cable mode - my gateway to the internet. I am able to ping the D Link IP address from the cisco router and also the internet. The D link using 192.168.0.0/24 subnet. I configured other subnets behind the cisco router. I managed to use NAT to be able to ping the D Link router but could never be able to ping anythin on the internet. All my other subnets behind the cisco router are NAT inside. The link between the D Link and the router as NAT outside. What do I need to do to be able to ping beyond the D-Link Router? I can ping internet addresses from the Cisco router but nothing beyond the D-Link from anything behind the cisco router. I worked with it so long until I started my working translations. Thanks, --- _[View the full topic](https://forum.networklessons.com/t/reflexive-access-list/1030)._