# What's segment Routing?

**URL:** <https://forum.networklessons.com/t/whats-segment-routing/8973>\
**Category:** IP Routing\
**Created:** [November 24, 2019, 12:22pm UTC](https://forum.networklessons.com/t/whats-segment-routing/8973 "2019-11-24T12:22:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![aleemiiui](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/a/3be4f8/32.png) [@aleemiiui](https://forum.networklessons.com/u/aleemiiui)\
**Post date:** [November 24, 2019, 12:22pm UTC](https://forum.networklessons.com/t/whats-segment-routing/8973/1 "2019-11-24T12:22:45Z")

</div>

What’s Mean by segment routing and its benefits over tradition routing??

---

<div class="post-metadata">

**Author:** ![lagapidis](https://cdn-forum.networklessons.com/user_avatar/forum.networklessons.com/lagapidis/32/4949_2.png) [@lagapidis](https://forum.networklessons.com/u/lagapidis)\
**Post date:** [November 25, 2019, 7:13am UTC](https://forum.networklessons.com/t/whats-segment-routing/8973/2 "2019-11-25T07:13:16Z")

</div>

Hello Muhammad

Segment routing is a type of source routing, and in order to understand it, it is important to first understand source routing.

Source routing is a routing methodology that allows the sender to either partially or fully determine the route a packet will take through the network. This is in contrast to traditional routing where routing decisions are made incrementally at each router/node along the path. This allows for easier troubleshooting and allows a host to “know” all of the possible paths to the destination.

Segment routing is a type of source routing that is being developed by the IETF. In a segment routed network, an ingress router may prepend a header to packets that contain a list of segments, which are instructions that are executed on subsequent routers in the network. These instructions may be forwarding instructions, such as an instruction to forward a packet to a specific destination or interface.

Segment routing works on top of IPv6 or MPLS. An excellent description of this mechanism can be found at the following Cisco documentation.

> **[Segment Routing Configuration Guide, Cisco IOS XE Release 3S - Introduction...](https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/seg_routing/configuration/xe-3s/segrt-xe-3s-book/intro-seg-routing.html)**
>
> Segment Routing Configuration Guide, Cisco IOS XE Release 3S -Introduction to
> Segment Routing

I hope this has been helpful!

Laz

---

<div class="post-metadata">

**Author:** ![staloneucan](https://cdn-forum.networklessons.com/letter_avatar_proxy/v4/letter/s/bbce88/32.png) [@staloneucan](https://forum.networklessons.com/u/staloneucan)\
**Post date:** [November 27, 2019, 3:55pm UTC](https://forum.networklessons.com/t/whats-segment-routing/8973/3 "2019-11-27T15:55:52Z")

</div>

Hi Muhammad,

Segment routing is a source based transport technology that provides simplicity, scalability and 100% protection on main and backup links. It uses segments behind it to work.

There are two types of segments: IGP segments and BGP segments.

Segment routing is also designated by SR and it has some beneffits than traditional IP/MPLS networks, as described bellow:

1 - Scalability  
2 - Simplicity  
3 - Zero microloops  
4 - SDN support  
5 - Network Programability for IPv6 (SRV6)

In traditional IP/MPLS networks there is something we call microloop, it happens more on ring topology, MPLS try to solve it with Loop Free Alternate but do not guarantee 100% link protection, SR uses Topology Independent Loop Free Alternate (TI-LFA), that in case of link failure do not wait for IGP convergence… TI-LFA informs about the failure in less than 50 mili second eliminating microloop and giving 100% of link protection in all cases.

Feel free to contact me for more details.

Nilton de Matos  
CCIE RnS #61356  
+244 921 300 811
