iBGP and eBGP in the BGP table

Routing & Switching BGP
1 
R1#show ip bgp 
BGP table version is 3, local router ID is 1.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> 1.1.1.0/24       0.0.0.0                  0         32768 i
*> 2.2.2.0/24       192.168.12.2             0             0 2 i

in the above output why the path is been identified with {i} which is internal where i am formed neighbor between 2 different AS

2

Hello Stalin

Can you give us a little more information about the topology that you have created? Is this from a particular lesson on the site or is it a topology that you created? Let us know so that we can help you troubleshoot further.

I hope this has been helpful!

Laz