Please See attachment.
Multiple VRFs configured under the sub-interface for the VLAN-to-VRF mapping on Customer A, and Customer B.
All switches configured with VLANs matching to respective Customer router. For example, VLAN 50 maps to GigabitEthernet0/0/0/2.50.
Desktop default-gateways is the sub-interface (GigabitEthernet0/0/0/2.50) IP address for respective Customer.
The core is complete were PEs established vpnv4, and ipv4 peering between each other. Labels are flowing through the core when trace command was on PE and P routers.
Need assistance with completing the configuration on the PEs. Please see below:
I’m stuck at configuring the PEs where the VLAN/VRFs mappings on the Customer are transported by the PEs into the core.
The PEs and Customer router has a /30 IP address configured between them.
I’ve searched the web for documentation but was unsuccessful in finding anything useful. I have been at this for several weeks, so I decided to reach out to someone for assistance.
I cannot provide specific configuration since I’m reproducing my work environment.
Thanks
Tim